Cable Organizer
Copyright Claim
Cable Organizer
Boost
121
200
12
Print Profile(4)
0.20mm +adaptive 0.8 layers, 2 walls, 7% infill
1.8 h
1 plate
0.2mm layer, 2 walls, 7% Gyroid infill
1.5 h
1 plate
0.2mm layer, 2 walls, 7% infill
2.1 h
1 plate
0.16mm layer, 2 walls, 15% infill
28 min
1 plate
Boost
121
200
12
3
188
135
Released
Description
I re-design and add few models for 1,2,3,4,5 or even 6 cables
I print this one with 0.4mm nozzle and 0.1mm layer height
Comment & Rating (12)
All
Print Profile
0.2mm layer, 2 walls, 7% Gyroid infill
easy and functional.
1
Reply
Print Profile
0.2mm layer, 2 walls, 7% infill
Too small for a pretty standard USB-C cable. Can't fit it in.
0
Reply
Print Profile
0.2mm layer, 2 walls, 7% infill
Printed the cable organiser for three cables. Looks good 👍
0
Reply
Print Profile
0.20mm +adaptive 0.8 layers, 2 walls, 7% infill
Came out nice, very useful, and no waste. Great!
0
Reply
Print Profile
0.20mm +adaptive 0.8 layers, 2 walls, 7% infill
Printed flawlessly
0
Reply
Print Profile
0.20mm +adaptive 0.8 layers, 2 walls, 7% infill
sehr guter Druck, ohne Probleme
0
Reply
Print Profile
0.20mm +adaptive 0.8 layers, 2 walls, 7% infill
0
Reply
Print Profile
0.20mm +adaptive 0.8 layers, 2 walls, 7% infill
0
Reply
Print Profile
0.20mm +adaptive 0.8 layers, 2 walls, 7% infill
0
Reply
Print Profile
0.20mm +adaptive 0.8 layers, 2 walls, 7% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld