Safe is important !

Do not use PLA ! Pla does not resist at head.

I used PET-G or ASA !

After printing you will need :

For a car : 8 screws ( 4,2 x 13 )

BISON double tape ( Bison, because is waterproof )

In the download you will get two files. One is with two pieces and the other one is just with one piece.
For a car you will need 4 pieces.
THIS MODEL IS TESTED FOR 3 Years.

I printed with 2/3 perimeters and at least 30% infill.
Layer height 0.15
Easy Pet-g and PetG from Fiberlogy

Mounting instruction:

Put Bison tape on support.
Clean the plate with windex or something similar.
Mount the support on the car.
Pop the plate on the bottom and then on the top, and after that, keep at least 25 seconds to be sure that the plate is taped on support.

BISON Double tape is for SAFETY !
It is impossible to lose the car plate !

This model is for EUROPEAN CAR PLATE .