Personalized Interlocking Family Bears Family of 4
Boost
151
276
46
Print Profile(2)
0.2mm layer, 2 walls, 15% infill
Designer
2.6 h
2 plates
faster & less waste - 0.2mm layer,2 walls,15% infill,A1 mini
2.1 h
2 plates
Boost
151
276
46
20
350
212
Released
Description
Easy to customize. Just edit the text in bambu studio and place how you would like.
Check my store for options with more bears soon to come.
INSTRUCTIONS TO EDIT TEXT:
STEP ONE: Select the bear you want to edit. Choose objects on the left side of the screen where the red arrow in the picture is pointing.
STEP TWO: On the left hand side the bear you want to edit will be highlighted. Click where is says “text_shape” and it will choose the name. Then you will click on the right upper hand side “Text Shape” icon which looks like “Ta” where the red arrow is pointing in the picture.
STEP THREE: Edit the text in the box shown. You can change the name, size, width, etc
Comment & Rating (46)
All
Boosted
after I edit the names, the names float above the print. how do I fix that?
The designer has replied
1
Reply
you will need to use the arrow keys to bring it back down
1
Reply
Also make sure all the Z axis have the same number, for example 1.3, so you don't end up printing the names at varying heights
1
Reply
Replying to @MagnetDanny
I ended up also reducing their sizes to save time and filament waste.. I'm printing it now, we'll publish the print profile if it ends up well at a shorter time
0
Reply
Also you, that make these?? 😊
0
Reply
Everybody makes these
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great easy print.
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great print for Mother's day!! Minor critique: Had to create new text to avoid numerous changeovers in filament. Still had a few due to the 2 larger bears are 1 layer smaller than the 2 smaller bears.
If I were to reprint, cut off the bottom layer in prepare tab and add new text for one changeover during the print.
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
perfect mother's Day gift. I haven't printed out the heart yet.
0
Reply
Print Profile
faster & less waste - 0.2mm layer,2 walls,15% infill,A1 mini
Printed Perfectly. Thank you for this share
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 15% infill
love it!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
on step #2 when I edit the text the words raise up on the z-axis and move outside the bear shape. Even if I just delete one letter from the standard model it'll immediately jump up. Any tips on how to fix this? thanks!
The designer has replied
0
Reply
If it is floating on you, select the text and click on the Move button at the top where the top red arrow is pointing. Then click on the blue arrow on the model where the bottom red arrow is pointing. Click and hold it and you can move it up or down as needed
0
Reply
Trying to edit the names crashes Bambu Studio every time for me.
0
Reply
I just published a profile that is faster with less waste, see on it's description, it should work for you, feel free to ping me if you need any help
0
Reply
License
This work is licensed under a
Creative Commons Attribution
© 2024 MakerWorld