*Flexible & Safe* Car Trash Bin
Copyright Claim
*Flexible & Safe* Car Trash Bin
Boost
27
52
6
GIF
Print Profile(3)
Original
Designer
2.9 h
1 plate
Thicker Bottom (3mm)
Designer
2.8 h
1 plate
Taller - 250mm
Designer
3.8 h
1 plate
Boost
27
52
6
0
29
17
Released
Description
A trash can bin for your car that's soft and flexible if you print it with ordinary PLA!
This is make sure you don't hurt your self getting in and out of the car and it's light weight with rounded corners - meaning if you have an accident it's most likely not to hurt you or your passengers.
You can either attach it directly with velcro or double sided tape but i recommend you print and use the fastners.
Attach the hook to the trash bin as seen in the pictures and the holder to any surfare - you can then easily remove and empty the bin.
Comment & Rating (6)
All
printed it 2 times, 2 times i waited after print to cool IT down 30m, and ...., the bottom detaches from the model. totally crap. PLA Bambu, slow print.
The designer has replied
0
Reply
That’s very strange! I printed it three times with different brands of PLA on a P1S and it came out perfect every time. Maybe try a calibration on your printer and/or try a generic standard profile?
0
Reply
Hi! I think the problem is with your printer but i've uploaded a different print profile that's got a 3 mm thick bottom with standard Bambu Studio settings except for infill, changed that to Gyroid. If you still got a problem then it's your printer mate.
0
Reply
Glue it back on?
1
Reply
I'd kill for it to be about 4 inches taller but otherwise very functional and quick print.
The designer has replied
1
Reply
Hey! I've added a print profile thats modified and 250mm height. X1 & P1 have a max at 254 so thats all i can do for you.
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld