LIghts holder for Tamyia plasma edge RC car. Contains a front bumper sleave for placing on original bumper, reflectors alowing place up to 4 diode lights with appropriate connector and glases for reflectors from transparent PLA or PETG. The sleave is designed to print from FLEX, reflectors from PETG or something harder if your printer support it and glases from transparent or similar material. Generally yo will need some LED lights kit for RC model with appropriate connector to be able to power up the lights from your RC receiver, or you can maybe DIY from leds and cables. Rest of parts you can print and assemble according to pictures. Connecting parts together and LED's to reflector I made by Loctite cyanacrylate glue and I fastened cables to RC car body by glue gun for easier repairing/replacing later.