Puzzle Box Lid - Hulk Stained Glass

This is a custom lid that works with the base of my puzzle gift box which can be found here:
https://makerworld.com/en/models/446736#profileId-353234

I wanted a way to be able to gift a puzzle, but for that person to know what the puzzle should look like when they put it together. So this is a 100x100mm Hueforge built into the lid of my puzzle gift box. The bottom of the box will easily hold a puzzle that is 200x200mm.

You can find the Hulk puzzle here:
https://makerworld.com/en/models/404682#profileId-306452

As well as my other puzzles and lids in this puzzle collection here:
https://makerworld.com/@CanadianGamer/collections/988102

-----------------------------------

If you're looking for a commercial license to sell my prints, or to make a custom puzzle & lid design request, please head over to my Patreon where those options are available: https://www.patreon.com/CanadianGamer3DPrintsEDM

-----------------------------------

***IMPORTANT***

If you slice my print profile you may get a warning about floating regions. You can ignore this, its due to the fact that we transition from 10% infill to 100% infill in the model.

My print profile for this lid has built in adaptive layers, so the lid itself will print with 10% infill at 0.2mm layer heights, but when it starts to print the hueforge topper, it will switch to 100% infill at 0.08mm layer heights. The Colour swaps are built into my print profile.

If you slice the STL yourself, you will need to set up the file and are responsible for your layer heights, colour swaps, and infill.

Start with Black

Switch to Blue Gray at 3.64mm

Switch to Green at 3.88mm

Switch to Yellow at 4.36mm until the end.