Shut your loud machine up for good. Make your fans Wisper Quiet @ 19.9db

Works for all Kobra 2 models

• This is taller than stock PSU cover you will need taller feet
• Here a link to some feet that work well Bambu Lab Anti-Vibration Feet

List on Materials:

Use a Noctua 12V fan you can use either a 92x14mm or 60x25mm just download corresponding model. I prefer the 92mm fan because of its wingspan and coverage.

Use buck converter to step down the 24v coming from power supply to 12V for the fans. I have posted 3 options below to pick from Solder version and No Solder Screw terminal version And Plug N Play version. You can make use any buck converter you wish to use. I have modeled the mounting points on cover for these two.

For 92x14mm Models: Noctua NF-A9x14 Fan

OR

For 60x25mm Models: Noctua NF-A6x25 Fan

Pick your Buck Converter. Have 3 Option to pick from Solder or Solderless Option with Screw Terminals or Official Noctua Plug and Play.

Solder Buck Converter

OR

No Solder DC Buck Converter

OR

Official 24v to 12v Noctua Buck Converter (Plug and play)

All Covers include mounting holes for Both style Buck Converters.

Dust Mesh Filter : create your own filter to place in cover to help keep dust out.

Installation:

Wiring: Black is - negative, Yellow is + positive, other two wires not used.

Adjust voltage with screw on top of blue potentiometer to 12v

• For better termination I recommend using ferrules for no solder version of buck converter here is a cheap kit: Ferrule Crimping Tool Kit

Mounting :

• Buck Converter: Two M2x4
• PSU Cover: Four M3x8 (Optional Countersink for better look)
• Stock Fan Direction is blowing outward. That would be with Logo and grill facing outward.
• If you are needing some bolts to do this project here, you go.

1. Hex Socket Head Screws Nuts Bolts and Washers Set Assortment M2 M3 M4 M5
2. Countersunk Hex Head Screws Nuts and Bolts and Flat Washers Assortment M2 M3 M4 M5

• Make sure to dry fit your screws before installing board will make for easier installation.
• Can use included Fan Screws. I prefer using the included anti-vibration mounts
• Install Antivibration Mounts for Noctua Fan = For easy install fit the anti vibration mounts to cover before trying to mount fan. There is a small catch at the base of mount that will hold it self in place. Make sure to pull the mount till catch is seated.
• 

Kobra 2 Max Owners Use This model with Mainboard Cover and Heat bed Mosfet Cover.

• Anycubic Kobra 2 Series Mainboard Cover Silent Fan Mod
• Anycubic Kobra 2 Max Heated Bed MOSFET Cover Mod

Print Instructions for Squares, Honeycomb and Stock

• -No supports needed

Print Instructions for Blank: Make your own custom design using slicers infill patterns:

• No supports needed.
• 0 Bottom Layers
• 0 Top Layers
• 4 Wall Loops
• Pick your Infill of choice.
• Pick your infill percentage play with this to get desired pattern.

Example:

• 40% Infill
• Trangle Infill
• 0 Bottom Layers
• 0 Top Layers
• 4 Wall loops