Description

Tomato Trellis Furring Strip Grip

_______________________________________________

About:

Simple prints to create a tomato trellis from inexpensive Furring Strips. I use 4 ft lengths of bamboo between the furring strips. Easily add more or adjust height as the plants grow.

____________________________________________

Steps To Print:

1. Print the grip and the locking portion
2. Firmly push the furring strip down into the soil
3. slide the grip portion over the furring strip at the height you need, oriented so the “teeth” keep it from sliding down
4. Slide the lock portion down over the grip portion to lock the height in place
5. Slide bamboo through the rings to create trellis

____________________________________________

Dimensions + Print Time + Filament Used:

• Roughly 50mm X 50mm X 33mm
• Print Time: 34min
• Filament used: 18 grams

____________________________________________

Settings:

• Layer height: 0.28mm
• Walls: 2
• Top shell layers: 2
• Bottom shell layers: 2
• Infill: 25%
• No Supports or Brim

_____________________________________________

Extra:

More Cool Prints:mwiller | Published - MakerWorld