update：

加入了不需要使用螺丝和支撑的新球轴，可以一体成型，更加方便美观。我为了阻尼效果设计的比较紧，可以打印第二盘，用钳子掰一下。

The new ball joint, which does not require screws and supports, can be integrally formed, making it more convenient and aesthetically pleasing. I designed it to be relatively tight for damping effect, you can print the second plate and use pliers to loosen it.

——————————————

说明

这是星穹铁道钟表小子的可动3d打印模型，具有包含球轴的四肢和可更换脸部。虽然看上去很像官方模型，但其中所有零件都是本人独立建模，参考为游戏截图。

参考来源：mihoyo
建模：bilibili@粮亦丰
要求：转载或使用请务必标注出处，小规模生产售卖也必须说明来源（makerworld链接和作者），以保持其开源性。

文件内容：钟表框架、可更换脸、帽子、肢体、鞋子、手、领结、钟表指针、卡扣、底座部件、安装工具（压球轴的）

安装指南

除了打印件以外的零件需求：3*12螺丝5个、3*5螺丝9个、直径6mm高3mm强磁多个、50*50*1mm方铁片（底座）、4*100mm不锈钢轴（底座）
 

（1）帽子和脸使用磁吸设计，拽鼻子可以更换。附带底座，与之前发布的王下一桶为同款。钟表指针可以轻松卡在鼻子底部的凹槽上。
（2）模型的身体被设计地非常容易安装，只需将四肢零件的球轴按压进前半部分设置好的凹槽，并用4个m3*12螺丝安装上反面即可。蝴蝶结用螺丝提前拧上。

（3）卡扣需要m3*12螺丝从小端完全拧紧，然后用来固定脖子和头部。
（4）对于多色打印版本，合理拆分项目文件可以用更好的效率还原形象。没有AMS也可以通过指定层暂停来实现多色，特别是脸。

（5）安装看内构图即可。

有问题写在评论区，或者来b站找我https://space.bilibili.com/17022346。

English：(translated by AI)

This is the movable 3D print model of the Clock Boy, with four limbs containing ball joints and interchangeable faces.

Although it looks similar to the official model, all parts are independently modeled, referencing game screenshots.

Reference Source: hoyoverse

Modeling: bilibili@粮亦丰

Requirements: When reprinting or using, be sure to indicate the source.

File contents: Clock frame, interchangeable face, hat, limbs, shoes, hands, bow tie, clock hands, clasp, base parts, installation tool (for pressing ball joints)

Installation Guide

In addition to the printed parts, the following parts are required: m3*12 screws, m3*5 screws, multiple 6mm diameter 3mm high strong magnets, 50*50*1mm square iron piece (base), 4*100mm stainless steel shaft (base)

(1) The hat and faces are designed with magnetic suction. Comes with a base, which is the same as the previously released Lordly Trashcan. The clock hands can easily be clipped into the groove at the bottom of the nose.

(2) The body of the model is designed to be very easy to assemble. Simply press the ball joints of the limbs into the grooves set in the front half, and secure them with 4 x M3*12 screws on the back.

(3) The clasp needs to be fully tightened with M3*12 screws from the small end, and then used to secure the neck and head.

(4) For the multi-color printing version, splitting the project files reasonably can achieve better efficiency in restoring the image. Without AMS, multi-color printing can also be achieved by specifying layer pauses, especially for the faces.

(5) Installation can be done by referring to the internal structure diagram.