This is a custom 3d printed mothers day hueforge card. we created a box for it so we could add back lighting and fake flowers with roxks and foam, we used these amazon fairy lights https://www.amazon.com/dp/B07MQD9PVH?ref=ppx_yo2ov_dt_b_product_details&th=1.

this card has 3 filaments and 4 swaps. the information is below. i will work on adding the box but i need to adjust it more for better fit

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 100x100mm in size
You may print at higher layer heights below the Min Depth of 0.24mm
The Max Depth is 2.1mm and the Actual Depth is 2.2mm

Filaments Used:
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyLite Temp Purple-Pink-Translucent (Med) Transmission Distance: 10
PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 3 unique filaments

Swap Instructions:
Start with Jade White
At layer #2 (0.24mm) swap to Temp Purple-Pink-Translucent (Med)
At layer #9 (0.8mm) swap to Black
At layer #15 (1.28mm) swap to Jade White for the rest.