The content uses translation and may not be accurate (English):

Yes, version 3.0 was updated.

The accessory is currently undergoing beta testing. You can get a preview, but I cannot guarantee its effectiveness.

After testing, the recommended filament weights for loading are as follows to avoid potential impacts on print quality:

• A1 series with AMS Lite: It is not recommended to load filament exceeding 3kg.
• A1 series without AMS Lite: It is not recommended to load filament exceeding 2kg, with an absolute limit of 3kg.
• P1 / X1 series: It is not recommended to load filament exceeding 3kg, with an absolute limit of 3-4kg.

We have implemented random seams to prevent excessive resistance when filament spools rotate. This helps maintain print quality but may slightly affect the aesthetics of some printed parts.

Instructions:

• The filament holder is designed to make it more convenient to replace various filaments of different specifications.
• There are long and short accessories available. The short version is more suitable for lightweight filaments (0.2 / 0.25KG), while the long version can accommodate most filaments. You can freely assemble them according to your needs:
• # TODO

Print for the holder accessories:

• It is recommended to use PETG or other stronger materials.
• For parts that are subjected to higher forces, it is advisable to print them horizontally to provide sufficient strength.

Emergency printed alternative for 608 bearings:

• Each set of holders requires 4 metal 608 bearings. If the corresponding metal bearings are not available, you can use the following model for printing, but there may be a decrease in effectiveness:
• Please note that this alternative can support a maximum of 3KG of filaments. For filaments exceeding 3KG, it is strongly recommended to use metal bearings. (For the A1 series, it is 2kg or less.)
• Model link: https://www.printables.com/model/276409-ultimate-608-bearing-with-calibration-kit-v2
• If using a BambuLab printer to print PETG, you can choose the file: tr_0.15_tt_0.15.stl
• This model has been integrated into the 3MF slicing file.

Purchase materials (links provided for reference only):

• https://www.aliexpress.us/item/3256802176623429.html
• https://www.aliexpress.us/item/2251801529876063.html

中文说明如下（Chinese）：

没错，3.0 更新了

该配件正在进行 Beta 测试，您可以抢先体验，但是我无法保证使用效果

经测试，推荐装载的耗材重量如下，否则可能会影响打印质量：

• A1 系列 配合 AMS Lite，不推荐装载超过 3KG 的耗材
• A1 系列 不推荐装载超过 2KG 的耗材，极限可装载 3KG 的耗材
• P1 / X1 系列 不推荐装载超过 3KG 的耗材，极限可装载 3-4KG 的耗材

我们使用了随机接缝来避免耗材盘转动时阻力过度集中，而导致打印质量受到影响，代价就是部分打印件的美观性会有所下降

说明：

• 该耗材支架旨在更方便的更换多种不同规格的耗材
• 配件均有长和短可供选择，其中短版配件对轻型耗材更为友好（0.2 / 0.25KG），长版配件可以适应大部分耗材，您可以根据需要自由组装：
• #TODO

支架配件打印：

• 建议使用PETG或其他更坚固的耗材。
• 部分受力较大的部件建议采用横向打印以提供足够的强度。

608 轴承的应急打印替代品：

• 每套支架需要4个金属608轴承，如果没有相应的金属轴承可用，可以使用以下模型进行打印，但是使用效果会有所下降：
• 请注意，该替代品最高支持 3KG 耗材，大于 3KG 的耗材请务必使用金属轴承，3KG 的耗材强烈建议使用金属轴承（对于A1系列，为2KG或更少）
• 模型链接：https://www.printables.com/model/276409-ultimate-608-bearing-with-calibration-kit-v2
• 如果使用 BambuLab 打印机打印 PETG，可选择文件：tr_0.15_tt_0.15.stl
• 该模型已集成至 3MF 切片文件

购买材料（链接仅用于参考）：

• 【淘宝】https://m.tb.cn/h.55vWHNJ?tk=mrfqWa2nKAb CZ3457 「轴承 603 604 605 606 607 608 609 6000 6001 6002Z ZZ RS」
  点击链接直接打开 或者 淘宝搜索直接打开 （碳钢轴承就可以了，没必要用太顺滑的）

注：请遵守CC知识共享协议，许可之外的用途需申请（）