UPDATE 7/9/2020:
Thanks for the comments here are the printing instructions -
Print the containers close end down. Non-Hydrometer lid the closed side down. The hydrometer lid print with grip side up.

UPDATE 7/1/2020:
-Added ContainerSmall. It is a shorter container for thinner spools.

I remixed this because I hate using supports. Reduced the print time from 6h13m to 5h4m. Also made two versions of the lid. One which holds the Hydrometer (humidity) and one that does not need it.

Any silica with 2mm+ size should be fine as the holes come out 1.5 max width and as mentioned in original, squares don't line up with circles well.

Here are the hydrometers I used.
https://www.amazon.com/Hygrometer-Thermometer-Humidifiers-Dehumidifiers-Greenhouse/dp/B07JMXL6K5/ref=sr\_1\_2?dchild=1&keywords=round+humidity+meter&qid=1593389445&sr=8-2

They are all about the same and about 6 different names, but the same meter on amazon. If you make a bunch of these, alibaba is the way to go.

Total Updates:

1. No supports needed
2. Used a different thread with a little more tolerance so it should be easier to print
3. Added a lip for the humidity meter to grab onto so it is more solid.
4. Entirely modeled in Fusion 360 to support additional humidity meters and other size requirements as they arise.

5. Bottom and top are patterned with same perforations as side now for better airflow.I have been printing and using these with PETG so I can just throw them into the dehumidifier and dont have to take out the desiccant.

   Will upload photo with humidity meter when my packages arrive this week. Used all of them before I took photos =).

   Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.2

Infill:

Filament:
[

Prusament PETG/PLA ](http://www.amazon.com/s?url=search-alias&field-keywords=Prusament+PETG%2FPLA&tag=thingiverse09-20) Many Post-Printing

How I Designed This

Fusion 360

Category: 3D Printer Accessories