At-At 1
Copyright Claim
At-At 1
Boost
43
89
4
Print Profile(1)
0.08mm layer, 1 walls, 100% infill
Designer
2.5 h
1 plate
Boost
43
89
4
1
53
13
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 180x175.92mm in size
You may print at higher layer heights below the Min Depth of 0.8mm
The Max Depth is 2mm and the Actual Depth is 1.8mm
Filaments Used:
PETG Creality Black Transmission Distance:
PETG Tpoimns Gray Transmission Distance:
PETG Creality White Transmission Distance:
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Gray
At layer #17 (1.44mm) swap to White for the rest.
Comment & Rating (4)
All
can this be scaled for a1 mini?
The designer has replied
1
Reply
This can be scaled down or up as long as the height remains the same. Sorry I missed your comment!
(Edited)0
Reply
Print Profile
0.08mm layer, 1 walls, 100% infill
The designer has replied
1
Reply
Thank you for rating my print!
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld